DYNAJET
Kit: abrasive blaster WSS 1000, index 00.xxxx – 800 th, 800 me
A wet sandblasting kit for professional abrasive cleaning with DYNAJET high-pressure systems. It supports the efficient removal of graffiti, rust, paint and other stubborn surface deposits across a wide range of materials.
Working pressure should match the task. Surface preparation and general maintenance typically use 150 to 500 bar, while industrial coating removal and concrete work require higher pressure. Contact your nearest distribution partner for guidance on the right pressure and flow rate for your specific job.
DYNAJET high-pressure cleaners are built in Tjæreborg, Denmark, for daily professional use. Spare parts and service are available through our distribution partners. For warranty terms specific to your unit, contact your local distribution partner.
DYNAJET high-pressure cleaners are built to comply with applicable safety and emissions standards. Operators should always follow local safety regulations and use appropriate protective equipment.
DYNAJET is sold exclusively through distribution partners worldwide, giving operators local access to product expertise, spare parts and service. If you do not know your local partner, contact us directly and we will help you find the right support in your region.
Controlled abrasive cleaning for demanding surfaces
The Water-Sandblasting WSS 1000 kit is designed for professional surface restoration and intensive cleaning work where water pressure alone is not enough. By combining high-pressure water with abrasive media, it helps remove coatings, corrosion and graffiti in a controlled and effective way.
Its circular nozzle arrangement with central blasting-agent feed is designed to support even processing and consistent cleaning results. That makes the system a practical choice for contractors working on metals, stone, masonry and other surfaces that require reliable material removal without unnecessary rework.
The kit is suited to a variety of blasting agents, giving professional users flexibility for different applications and surface sensitivities. Whether used for rust removal, paint stripping or graffiti cleaning, it is a robust accessory for everyday industrial and municipal cleaning tasks.
Sandblasting medium
Sandblasting system for easy removal of e.g. graffiti or rust.
Circular arrangement of the high-pressure nozzles with central blasting agent feed in the sandblasting head for optimum results.
The wet sandblasting system is suitable for grain sizes from 0,2 – 1,4 mm. For example the following blasting agents can be used:
- Mineral blasting agent (sand): Removal of rust and paint from metals
- Sodium carbonate (water soluble): Cleaning of delicate surfaces like aluminum, glass, plastics or stainless steel
- Slag (fine): Cleaning and removal of graffiti from sand stone or brick as well as other dark colored surfaces
- Slag (coarse): Very aggressive blasting agent for removal of rust or old layers of paint from metals
- Glass powder: Slag (fine): Cleaning and removal of graffiti from natural stone other light colored surfaces
- Glass beads: Cleaning of copper or bronze
Accessories in the kit
Water-sandblasting nozzle WSS 1000 (435111)
Nozzle set for WSS 1000 shape E Index 00.xxxx - d=0,70mm (447561)
Abrasive suction hose f WSS 12m LW=19 mm - L= 12 m (414037)
Suction pipe DN16 (548770)
Clamps for suction hose d=20-32 mm - b=12 mm (001422)
Lance extension 1600 bar 800 mm 9/16 UNF LH (482515)
Pressure screw M26x1,5 (474635)
Thrust ring (474636)
Antiseize lubricant white 30g (505919)
Cap M26x1,5 IG (548801)
Coupling GEKA G3/4 - D=19 mm - PN10 (001387)