DYNAJET
Kit: abrasive blaster WSS 1000, index 00.xxxx – 350 th, 350 mdh
The Water-sandblasting WSS 1000 is a professional abrasive blasting kit for DYNAJET high-pressure cleaners. It is designed for controlled removal of graffiti, rust, old coatings and other stubborn deposits on a wide range of surfaces.
Working pressure should match the task. Surface preparation and general maintenance typically use 150 to 500 bar, while industrial coating removal and concrete work require higher pressure. Contact your nearest distribution partner for guidance on the right pressure and flow rate for your specific job.
DYNAJET high-pressure cleaners are built in Tjæreborg, Denmark, for daily professional use. Spare parts and service are available through our distribution partners. For warranty terms specific to your unit, contact your local distribution partner.
DYNAJET high-pressure cleaners are built to comply with applicable safety and emissions standards. Operators should always follow local safety regulations and use appropriate protective equipment.
DYNAJET is sold exclusively through distribution partners worldwide, giving operators local access to product expertise, spare parts and service. If you do not know your local partner, contact us directly and we will help you find the right support in your region.
Controlled abrasive cleaning for demanding surface work
The Water-sandblasting WSS 1000 kit extends a DYNAJET high-pressure cleaner with a practical abrasive blasting function for professional surface restoration and cleaning tasks. It is suited to users who need an efficient way to remove coatings, corrosion, graffiti or other firmly attached contamination while maintaining controlled handling on the job site.
Its water-sandblasting principle combines high-pressure water with blasting media in a circular nozzle arrangement and central media feed, supporting even application and dependable results during use. This makes the kit a valuable tool for contractors working on metal, stone, brick, glass, plastics or other sensitive and robust surfaces, depending on the chosen blasting agent.
With its focus on versatility and precise surface treatment, the WSS 1000 supports flexible everyday work in refurbishment, maintenance and cleaning applications. It is a strong professional solution for users who want to broaden the capabilities of their DYNAJET system with an abrasive process that remains practical and controlled.
Description
Sandblasting system for easy removal of e.g. graffiti or rust.
Circular arrangement of the high-pressure nozzles with central blasting agent feed in the sandblasting head for optimum results.
The wet sandblasting system is suitable for grain sizes from 0,2 – 1,4 mm. For example the following blasting agents can be used:
- Mineral blasting agent (sand): Removal of rust and paint from metals
- Sodium carbonate (water soluble): Cleaning of delicate surfaces like aluminum, glass, plastics or stainless steel
- Slag (fine): Cleaning and removal of graffiti from sand stone or brick as well as other dark colored surfaces
- Slag (coarse): Very aggressive blasting agent for removal of rust or old layers of paint from metals
- Glass powder: Slag (fine): Cleaning and removal of graffiti from natural stone other light colored surfaces
- Glass beads: Cleaning of copper or bronze
Accessories in the kit
Counter nipple M22x1,5 - G1/4 - PN500 (427197)
Lance extension 500 bar 350 mm G1/4 (427197)
Adapter nipple G9/16-18A UNF - G1/4 (448204)
Water-sandblasting nozzle WSS 1000 (448204)
Nozzle set for WSS 1000 shape E Index 00.xxxx - d=0,60mm (447560)
Abrasive suction hose f WSS 12m LW=19 mm - L= 12 m (414037)
Suction pipe DN16 (548770)
thread seal (high-strength) 50g (456363)
Coupling GEKA G3/4 - D=19 mm - PN10 (001387)
Clamps for suction hose d=20-32 mm - b=12 mm (001422)
Cap M22x1,5 IG (425680)