DYNAJET
Kit: abrasive blaster WSS 1000, index 00.xxxx – 220 mdh
A wet sandblasting kit for DYNAJET high-pressure cleaners, designed for efficient removal of graffiti, rust and old coatings. It combines water and abrasive media for controlled surface treatment on demanding professional cleaning jobs.
Working pressure should match the task. Surface preparation and general maintenance typically use 150 to 500 bar, while industrial coating removal and concrete work require higher pressure. Contact your nearest distribution partner for guidance on the right pressure and flow rate for your specific job.
DYNAJET high-pressure cleaners are built in Tjæreborg, Denmark, for daily professional use. Spare parts and service are available through our distribution partners. For warranty terms specific to your unit, contact your local distribution partner.
DYNAJET high-pressure cleaners are built to comply with applicable safety and emissions standards. Operators should always follow local safety regulations and use appropriate protective equipment.
DYNAJET is sold exclusively through distribution partners worldwide, giving operators local access to product expertise, spare parts and service. If you do not know your local partner, contact us directly and we will help you find the right support in your region.
Controlled blasting for demanding surface cleaning
The Water-Sandblasting WSS 1000 is a professional abrasive blasting kit for use with DYNAJET high-pressure cleaning systems. It is built for users who need a practical solution for removing graffiti, rust, paint and other stubborn deposits from a wide range of surfaces.
Its circular nozzle arrangement with central abrasive feed supports even blasting action and helps deliver consistent cleaning results in everyday field work. That makes it a valuable accessory for contractors and service teams working on metal, masonry, stone and sensitive materials alike.
Because the system is designed for wet sandblasting, it offers flexible use with suitable blasting media for different applications. From delicate cleaning tasks to more aggressive surface preparation, it supports efficient work while maintaining good control over the blasting process.
Sandblasting medium
Sandblasting system for easy removal of e.g. graffiti or rust.
Circular arrangement of the high-pressure nozzles with central blasting agent feed in the sandblasting head for optimum results.
The wet sandblasting system is suitable for grain sizes from 0,2 – 1,4 mm. For example the following blasting agents can be used:
- Mineral blasting agent (sand): Removal of rust and paint from metals
- Sodium carbonate (water soluble): Cleaning of delicate surfaces like aluminum, glass, plastics or stainless steel
- Slag (fine): Cleaning and removal of graffiti from sand stone or brick as well as other dark colored surfaces
- Slag (coarse): Very aggressive blasting agent for removal of rust or old layers of paint from metals
- Glass powder: Slag (fine): Cleaning and removal of graffiti from natural stone other light colored surfaces
- Glass beads: Cleaning of copper or bronze
Accessories in the kit
Counter nipple M22x1,5 - G1/4 - PN500 (427197)
Lance extension 500 bar 350 mm G1/4 (427179)
Adapter nipple G9/16-18A UNF - G1/4 (448204)
Water-sandblasting nozzle WSS 1000 (435111)
Nozzle set for WSS 1000 shape E Index 00.xxxx - d=0,60mm (447560)
Abrasive suction hose f WSS 12m LW=19 mm - L= 12 m (414037)
Suction pipe DN16 (548770)
thread seal (high-strength) 50g (456363)
Clamps for suction hose d=20-32 mm - b=12 mm (001422)
Cap M22x1,5 IG (425680)
Coupling GEKA G3/4 - D=19 mm - PN10 (001387)